Dust binding machine ESM150
The IAG ESM150 dust binding machine can be used wherever large-scale dust emissions occur. The ESM150 can be used a wide variety of situations, for instance at construction sites (in the demolition of buildings), in tunnel construction or in surface mining and quarrying (open pit mining, quarries, gravel pits and stone-crushing works).
A powerful fan and a special nozzle arrangement enable a water output of between 20 and 600 l/min at a spray distance of about 50 meters.
With its modular design, the ESM150 can be combined with other equipment in a variety of ways, suiting it for use in any terrain as well as for tower mounting. Customers can select as required from a wide range of options for the water spray unit, from a straightforward standard machine with manual control to a fully automatic version including centralized Profibus control. If required, we also engineer and manufacture to customer specifications complete spray systems consisting of several dust binding machines with a centralized control unit. Prices available on request
Requirements for operation:
- 5-25 bar water pressure
- Storz C coupling
- CEE electrical power supply 32 A/400 V
Technical data ESM150 basic machine:
| Water spray distance: | 50 m |
| No. of nozzles: | 95 |
| Water flow rate at 10 bar: | 20 - 150 l/min |
| Water filter including screen: | 200 microns |
| Water supply fitting: | Storz C coupling |
| Inclination adjustable to 6 positions: | 5-55° |
| Length: | 1.300 mm |
| Width: | 1.300 mm |
| Height: | 2.000 mm |
| Weight: | 392 kg |
| LAeq equivalent steady sound pressure level at 20 m: | 76,1 LAeg |
| Turbine motor: | 15 kW |
| Power supply voltage rating: | 400 V |
| Frequency: | 50 Hz |
| Current rating: | CEE 32 A |
| Total power consumption: | 22 A |
